1100 series press type panic exit device is designed to provide a safe and effective escape route at any time by the single action of pushing on a panic bar fitted across the full width of a door. The press type panic exit device consists of latch bolt, body and press rod. The series panic bars are applicable to the outward opening doors. This economical press type panic exit device is also ideal for warehouse, factories project. Slight pressure on the panic exit hardware touch bar will retract latch for exit. The press type panic exit device can be optimized for use with Oubao door closer.
Properties of 1100 Series Press Type Panic Exit Device
1.This panic exit hardware is manufactured to be used on single doors and the first opening leaf of double doors.
2.The panic bars supply left or right hand, and can be reversed on site.
3.Double door strike is available for double rebated door applications.
1.This press type panic exit device is non-handed, and is suitable for both right and left hand door and the door up to2500mm high×1300mm wide.
2.This vertical type panic bar is equipped with two point locking for extra security.
3.This panic exit hardware with maximum flexibility can be operated from outside with external access device.
1.Tighten the screws two months after the panic bar being installed;
2.Do not install the press type panic exit device in the open air, or it well easily get rusty.
Packaging and Transportation:
1.One piece in an inner box, eight inner boxes in one carton;
2.Transport by sea or by air.